Procurar Fita De Polipropileno, Fita De Membrana De Malha De Polipropileno, Fita De Membrana De Malha De Polipropileno Anticorrosivo no diretório Industry Directory, fabricante / fornecedor / Fábrica confiável a partir de China

Cesta de Consulta (0)
Página inicial > Lista de Produto > Fita de polipropileno > Fita Anticorrosiva de Membrana de Malha de Polipropileno

Fita Anticorrosiva de Membrana de Malha de Polipropileno

Informação básica

Modelo:  T500

Descrição do produto

Código: 39191099 Fita de membrana de malha de polipropileno (T 500) Fita de membrana de malha de polipropileno (T 500) Fita de membrana de malha de polipropileno (T 500) Fita de membrana de malha de polipropileno (T 500)
IDescrição
O T 500 polipropileno malha fita de fita é fita aplicada a frio para ambos os condutas metálicas e impermeabilização trabalha contra o tempo frio ao ar livre.

Anticorrosive Polypropylene Mesh Membrane Tape

IIStructures
Backing: Pano tecido PP tecido,
Camada adesiva: Borracha butílica Composto betuminoso
III Usos


Waterproofing- Pipelines protection
-Waterproofing membrane for basements,substructures and flat deck applications. plazas, bridge, vehicular traffic structures, or parking decks overlaid with an asphalt concrete wearing course.
-Tough, high performance waterproof membrane for critical substructures and civil engineering works.
-Provides a vapor and waterproof membrane to water excluding structures and protects concrete from attack by aggressive ground salts.
-Protection for wall ,floor, roof, corner, basement etc. to against from attack by bad weather, rain, acid alkaline salt
_ Weld joints
_ Bends
_ Fittings
_ Bare pipe lengths
_ Pipe rehab and repair
-Bare pipe length
 

IV Recursos


Waterproofing- Pipes protection
-Cold applied.
-High resistance  to bad weather environment
-Good performance itself to keep dry
-Easily application &installation.
-Suitable for a wide range of temperatures
- Compatible primers
-Safe,clean
_ Cold applied
_ Excellent self adhesion to pipe
_ Flexibility provides extra protection at vulnerable areas
_ Excellent conformability and consistent uniform thickness
_ Easily applied with no special equipment
_ Compatible with common pipe coatings
_ Excellent resistance to cathodicdisbonding
 









V Dados Técnicos

PHYSICAL PROPERPTIES UNIT TEST METHOD TYPICAL VALUES
Total thickness mil ASTM D 1000 40mils 50mils 60mils 65mils
Tensile Strength lb/in ASTM D 1000 30(5kg/cm) 35(6.3kg/cm) 39(7kg/cm) 42(7.5kg/cm)
Length

25mtrs 20mtrs 15mtrs 10mtrs
Width

2",4",6",9"
Peel adhesion          To primed pipe oz/in ASTM D 1000 269(3kg/cm) 296(3.3kg/cm) 314 (3.5kg/cm) 340(3.8kg/cm)
        To backing oz/in ASTM D 1000 90(1kg/cm) 90(1kg/cm) 117(1.3kg/cm) 135(1.5kg/cm)
Dielectric Strength KV/mm ASTM D 1000 42 42.6 43 43.8
Volume Resistivity ohm·m ASTM D 257 2.5 X 1012 2.5 X 1012 2.5 X 1012 2.5 X 1012
Water Vapor Transmission Rate g/ m2 /24h ASTM E 96 0.06 0.05 0.03 0.02
Water Absorptivity % ASTM D 570 0.1 0.1 0.1 0.1
Application Temperature °F
-31-+160  (-35-+70ºC)
Max service temperature °F
-40-+176  (-40-+80ºC)

Grupo de Produto : Fita de polipropileno

Enviar e-mail para este fornecedor
  • *Assunto:
  • a:

  • *Mensagens:
    Sua mensagem deve estar entre 20-8000 caracteres